Teakdecking System Products
Teak Deckingsystems Application Maintenance Instructions
Teak Deck Caulking – TDS SIS440
A primer free one-part, silane polymer, paste-like neutral cure seam sealant, which, when exposed to moisture in the air, reacts to form a tough, flexible, solid rubber compound. It has additional bonding agents in it that eliminate the need to use a primer.
The caulking is thixotropic and does not sag during cure. When cured, it has excellent temperature stability and chemical resistance. Because it has neutral cure properties it is non-corrosive to all substrates.
Available in 305 ml cartridges and 592 ml sausages. Comes in three different colours: black, white and grey.Download product information sheet
TDS FFE-200 Fairing & Bonding Epoxy
The TDS FFE-200 universal Fairing & Bonding Epoxy is a custom blended epoxy mastic of high quality resins, activators and engineered fillers to yield a light weight, flexible and easily-sanded system used for both fairing of deck substrates and the final glue-down of deck panels or battens.
It weighs only 0.85 kg per liter when cured and its cell-like structure makes it an excellent sound and thermal insulator. The viscosity is formulated to be high enough to stay in place when used for fairing, but low enough to provide excellent wet-out for bonding. The epoxy will cure in temperatures as low as 7º C. Best working temp. 10-30º C
Available 7.57 L kit on bucket. Approx. use per m2 1.25 liter, glued to a fair surface.Download product information sheet
TDS FE-180A Fitting Epoxy
This fitting epoxy is a non-corrosive, custom-blended, flexible mastic of high quality epoxy resins and activators to yield a flexible bonding system for teak and on other woods, fiberglass, aluminum and steel. Internal fiber reinforcement provides excellent strength for bonding to the substrate. Once cured, this fitting epoxy serves as an additional corrosion barrier to the sub-surface.
TDS Fitting Epoxy FE-180A will cure in temperatures as low as 10º C. Best working temperature 20-30º C. The epoxy is user-friendly and the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed.
Available in 3.78 L & 7.57 L kits. Approx. use per m2 1.25 liter, glued to a fair surface.Download product information sheet
TDS FE-220T Fitting Epoxy
TDS Fitting Epoxy FE-220T is a non-corrosive, custom-blended flexible mastic of high quality epoxy resins and activators, to yield a flexible bonding system for teak and on other woods, fiberglass, aluminum and steel. Internal fiber reinforcement provides excellent strength for bonding to the substrate. Once cured, this epoxy serves as an additional corrosion barrier to the sub-surface.
TDS Fitting Epoxy FE-220T will cure in temperatures as low as 4,4º C. Best working temp. 15-30º C. The epoxy was developed to be user-friendly, and the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed.
Available in 7.57 L & 37.85 L kits. Approx. use per m2 1.25 liter, glued to a fair surface.Download product information sheet
TDS ECO-100 Teak Cleaner Powder
This teak cleaner powder is a NEW high performance, concentrated teak cleaner. Even though it contains no acid, caustic sodas and phosphates, it is a very powerful and effective cleaner that cleans and brightens without removing the soft fibers of the teak. It mixes easily in water and is designed notto harm your teak, caulking, hardware or paint.
This teak cleaner has been formulated to be 100 % environmentally-friendly and is the most advanced truly green teak cleaner powder in the marine industry today. TDS ECO-100 meets "The Clean Marina Program".
Comes in pails of 0.9 kg, 3.63 kg or 18.14 kg (2, 8 and 40 LB pails). Approx. use per kg. 24-38 m2 depending on mixing ratio.Download product information sheet
TDS ECO-300 Cleaner & Brightener
This teak cleaner is a specially formulated 2in1 liquid cleaner & brightener that is effective for both light and heavycleaning. It also brightens and restores the wood's original golden colour.
TDS ECO-300 has been formulated to be 100 % environmental-friendly and is the most advanced teak cleaning liquid in the marine industry today. It contains no acid, caustic sodas, or phosphates and is none-toxic to the user. TDS ECO-300 meets "The Clean Marina Program".
The cleaner is designed to not to harm your teak, caulking, hardware or paint. It is a NEW ready-to-use cleaner that cleans and brightens better than harsh chemicals on the market.
ECO-300 comes in 0.95 L, 3.78 L and 18.92 L (1qt, 1 and 5-gal pails) Approx. use per liter 24-38 m2 depending on mixing ratio.Download product information sheet
Teak Deck Accessories
We offer a range of special hand-tools and accessories for preparing and re-fitting of teak-decks. These tools are specially developed by Teakdecking Systems for their own usage, to get the best possible results and the fastest turnover. The tools include bond-breaker tape, reefing hooks, and seam-sanders.Download more information on TDS professional tools
If you have questions or cannot find the product, you are looking for, please get in touch with us.